Bluetooth ® Access Point Charging Base - VeriFone VX 680 Installation Manual

T S
ERMINAL ETUP
Powering Up the Base Station
®
Bluetooth Access
Point Charging Base
Powering Up the
Base Station
To power up the base
station
42
VX 680 I
NSTALLATION
®
The Bluetooth Access Point Charging Base allows the VX 680 WiFi and
®
Bluetooth -enabled terminal to connect wirelessly to the network. It has three
LED indicators: power indicator, bluetooth traffic and modem traffic.
Figure 29 The VX 680 Bluetooth Access Point Charging Base Station
Use the procedure in this section to connect the VX 680 Base Stations to a power
source.
1
Insert the round barrel connector of the power pack into the power port at the
back of the Base Station. For Bluetooth
see Power Connection to the Bluetooth
Figure 30 Connecting the Base Station to a Power Source
2
Insert the AC power cable into the power pack.
3
Plug the AC power cable into a wall outlet or power surge protector.
4
Confirm that the Base Station is powered up as indicated by the solid green
LED.
G
UIDE
®
Access Point Charging Base Station,
®
AP Charging Base Station.