Menu Function Definitions - Philips VARILITE VL1100 LED User Manual

❋
VARI LITE® - VL1100 LED

Menu Function Definitions

For easy reference, each possible menu item is listed alphabetically in the first column by its display
abbreviation. The second column follows with a definition of the abbreviation and then a third column
provides an explanation of its purpose and function.
Display Definition
10 Min 10 Minutes
30 Sec 30 Seconds
5 Min 5 Minutes
Address DMX Address
ALL All Motors
ALL SEQ All Sequence
Amber
Arc
Blue
Cal ON Calibration On
Chan XXX DMX Channel
Clear
ColorMix Color Mixer
Config
Configuration
Data DMX Data
Diffusn Diffusion
Dimmer
Disable
Display
Illumination
DMX
Drv Ver LED Driver Version
Drv Temp LED Driver Temp
Edge Edge Function
Enable
Encoder Encoders
F1 RPM Fan 1 RPM
F2 RPM Fan 2 RPM
FAIL Test Fail
Fixt Hrs Fixture Hours
Fixture
58
VL1100 LED HP U
AND
Purpose
Sets Menu Display to automatically shut off after 10 minutes of non-use.
Sets Menu Display to automatically shut off after 30 seconds of non-use.
Sets Menu Display to automatically shut off after 5 minutes of non-use.
Amber Specifies Amber for manual control (Manual) or test Amber functions (Test).
Arc
Blue Specifies Blue for manual control (Manual) or tests Blue functions (Test).
Configures arc luminaire so that lamp will strike after calibration procedure is
Clear
System Accesses functions for setting lamp, pan/tilt, and Menu Display options. Also
accesses lamp information such as number of strikes, and hours used, along
Accesses function for displaying DMX data by channel number.
Specifies manual control of Diffusion (Manual) or tests Diffusion functions (Test).
Dimmer Specifies dimmer mechanism for manual control (Manual) or tests dimmer/
Disable
Display
DMX
Displays current LED Driver software version. A blank screen indicates a board
Specifies edge function for manual control (Manual) or for testing (Test).
Enable
Displays the speed of the Fan connected to J14 on the LED Driver Board. A
speed of 0 indicates a fan malfunction or board communication error.
Displays the speed of the Fan connected to J15 on the LED Driver Board. A
speed of 0 indicates a fan malfunction or board communication error.
Displays total number of hours luminaire has been powered on.
Fixture Access luminaire specification information such as model, serial number, soft-
' M
SER S ANUAL
Accesses function for setting luminaire DMX starting address.
Tests all internal motors.
This test sequences though all the features on this fixture.
Specifies luminaire as having an arc lamp source.
Specifies DMX channel for display of current data value.
Clears stored parameters and re-calibrates luminaire.
Tests color mixing mechanism.
with their respective reset function.
strobe functions (Test).
Disables a function.
Accesses options for Menu Display on and off times.
Sets starting address for DMX systems.
Displays current LED driver card software version.
communication error.
Enables a function.
Accesses encoder choices for diagnostic testing.
Indicates that sensor test has failed.
ware version, along with status information.
13 J un e 20 17
complete.
02.1602.0002