Function Definitions - Philips VL550 User Manual

Function Definitions

Each menu item is listed in the first column by its display abbreviation. The abbreviations appear in
alphabetical order as opposed to their position in the menu display sequence for easy reference.
Display
10Min
100V
120v
230v
30sec
5Min
Address
ALL SEQ
Cal ON
CD
Chan XX
ChgLu-
mID
Configure
Cyan
Data
Diffuser
Dimmer
Dimmer
Curves
Disable
Display
DMX
Download
Enable
Encoder
External
Fan Mode
Fans
02.96 83.000 1 0
Table 4-2: Menu Function Definitions
Definition Purpose
10 Minutes Sets Menu Display to automatically shut off after 10 minutes of non-use.
230V IGBT Dimmer ( DIMMER ) setting - for setting/identifying the internal IGBT dimmer to 100V
Setting with the Internal 120V IGBT Dimmer Only)
120V IGBT Dimmer ( DIMMER ) setting - for setting/identifying the internal IGBT dimmer to 120V
Setting with the Internal 120V IGBT Dimmer Only)
230V IGBT Dimmer ( DIMMER ) setting - for setting/identifying the internal IGBT dimmer to 230V
Setting with the Internal 230V IGBT Dimmer Only)
30 Seconds Sets Menu Display to automatically shut off after 30 seconds of non-use.
5 Minutes Sets Menu Display to automatically shut off after 5 minutes of non-use.
Address Accesses functions for setting luminaire starting address in DMX ( DMX ) controlled
systems.
All Sequence Performs all tests in sequential order.
On after Calibration Configures arc luminaire so that lamp will strike after calibration procedure is com-
plete.
CD Lamp Selects to CD Lamp Setting (VL550CD models only)
DMX Channel Specifies DMX channel for display of current data value.
Change the luminaire Allows access to change or set the luminaire ID number.
ID number
System Accesses functions for setting lamp start up, pan/tilt, Menu Display, changing
Configuration luminaire ID, and resetting luminaire default values.
Cyan Color System Specifies Cyan color system for manual control ( Manual ) or for testing ( Test ).
DMX Data Accesses function for displaying DMX data by channel number and type. Also refer-
ences DMX address.
Diffuser Specifies diffuser function for manual control ( Manual ) or for testing ( Test ).
Dimmer Specifies dimmer function for manual control ( Manual ) or for testing ( Test ).
Dimming Curve Specifies dimmer curve selection (Linear, Square Law, JATET A, or JATET B).
Selection
Disable Disables a function.
Display Illumination Accesses options for Menu Display on and off times.
DMX Accesses functions for setting DMX mode or pan/tilt options.
Download Downloads program to luminaires.
Enable Enables a function.
Encoders Accesses pan or tilt encoder for diagnostic testing ( Test ).
External Dimmer Sets luminaire to operate with an external dimmer.
Fan Mode Sets the luminaires to operate normally ( Auto -fans engage when preset thermal
limits are surpassed) or off ( Off ).
Fan Speed Tests luminaire's fan speed (0 = off to 7 = fastest).
16 No vemb er 2010
M S : M
ENU YSTEM ENU
4
O
PERATION
(For use
(For use
(For use
49