❋
VARI
LITE® - VL1100 LED
Installation Procedures
Accessory Frame Holder
An accessory frame holder is provided for the addition of a top hat or gel frame with silks, frosts or
color correction if required. The frame holder is designed to fit a standard 8-inch gel frame or top hat.
To remove and replace frame or top hat:
Step 1. Disconnect luminaire AC input cable from power source.
Step 2. At front lens, press upward on accessory frame latch and turn to open.
Step 3. Remove frame/top hat, if any
Step 4. Install frame/top hat and close latch.
Latch
Head Assembly
16
VL1100 LED HP U
AND
(Figure
Press Up
and Turn
NOTE:
The accessory frame is not a Vari-Lite accessory.
Figure 2-2: Installing a Frame or Top Hat
13 J un e 20 17
'
M
SER
S
ANUAL
2-2).
Gel, Silk, or
Frost
Accessory Frame
02.1602.0002