Changing The Password Through The Cli - HP ProLiant DL140 User Manual

18 HP ProLiant DL140 and HP ProLiant DL145 Lights-Out 100i Remote Management
User Guide
2. Input the password as indicated, and click the Set button to save the changes.

Changing the password through the CLI

Passwords are case-sensitive and can contain up to 16 characters. To change the
user password through the CLI:
1. Log into the CLI as described in the "Logging in to the remote management
processor" section.
2. At the command prompt, enter Changepassword.
3. Enter the current password when prompted.
4. Enter the new password when prompted.
5. Reenter the new password when prompted.