Command
N[etwork setup]*
R[eset] warm
R[eset] cold
V[ersion]
H[ELP]
Q[UIT]
* NOTE: Entering network setup to configure the network results in the command prompt
to INET>. For information on additional commands that can be entered at the INET>
prompt, refer to the "Using the system event log (on page 22)" section.
Changing the password
The user password is stored in nonvolatile memory and can be changed through a
web browser ("Changing the password through a web browser" on page 17) or
the CLI ("Changing the password through the CLI" on page 18).
Changing the password through a web browser
1. Click User Configuration on the main menu navigation bar.
Using Integrated Lights-Out 100i
Action
Sets up the network
Resets the server
Powers off the server and powers on the
server after a short time has passed
Shows the management firmware version
Displays a list of commands
Logs out of the remote management card
17