Microsoft Windows Ems Management - HP ProLiant DL140 User Manual

20 HP ProLiant DL140 and HP ProLiant DL145 Lights-Out 100i Remote Management
User Guide

Microsoft Windows EMS management

Microsoft® Windows® Server 2003 provides text-based console access. You can
connect a laptop to the remote management processor to perform basic
management tasks on the ProLiant DL140 or ProLiant DL145 G2 target system.
The Windows® EMS Console, if enabled, displays the processes that are running
and enables administrators to halt processes. This capability is important in cases
in which video, device drivers, or other operating system features have prevented
normal operation and normal corrective actions.
To enable Windows® EMS management on the target ProLiant DL140 or
ProLiant DL145 G2 system:
1. Press the F10 key during POST to enter BIOS Setup Utility.
2. Press the right arrow (→) key to navigate to the Advanced menu.
3. Press the down arrow (↓) key to scroll down to the EMS Console option, and
press the Enter key to enter the submenu.
4. Select Enable.
5. Press the Esc key to return to the previous screen, or press the F10 key to
save the changes and exit Setup.
You can now view the Windows® EMS management console remotely by
establishing a telnet session to the IP address of the target server from a client
PC. Consult your operating system documentation for further details on
establishing telnet sessions.
NOTE: You must follow the instructions in the "Additional network
settings" section to configure the network access properly.
NOTE: If you encounter problems logging in to the remote console, be
aware that some telnet programs might require you to enable their send
line feed at end of line option. If the remote console does not
respond to the Enter key, try setting this option in your telnet program.
NOTE: You must follow the instructions in the "Additional network
settings" section to configure the network access properly.