Chapter 2 Hardware Installation; The Front Panel - TP-Link TL-WA701ND User Manual

Chapter 2 Hardware Installation

2.1 The Front Panel

The front panel of the TL-WA701ND consists of several LED indicators, which is designed to
indicate connections. View from left to right, Table 2-1 describes the LEDs on the front panel of the
AP.
LED Explanation
Name Status
Off
Power
On
Off
On
System
Flashing
Off
LAN
On
Flashing
Off
WLAN
Flashing
Slow Flash
QSS
On
Quick Flash A wireless device failed to be added to the network by QSS
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide
Figure 2-1
No Power
Power on
The device has a system error
The device is initialising
The device is working properly
There is no device linked to the corresponding port
There is a device linked to the corresponding port but no activity
There is an active device linked to the corresponding port
The Wireless function is disabled
The Wireless function is enabled
A wireless device is connecting to the network by QSS function.
This process will last in the first 2 minutes.
A wireless device has been successfully added to the network by
QSS function.
function.
Table 2-1
Indication
3