Dell 1600n User Manual page 40

Printing on Letterhead
Check with the manufacturer or vendor to determine whether the preprinted letterhead
you have chosen is acceptable for laser machines.
Page orientation is important when printing on letterhead. Use the following table for help
when loading letterhead in the print media sources.
Print Media Source
Tray 1 (standard tray)
Optional Tray 2
Bypass tray
Selecting Prepunched Paper
Prepunched paper brands can differ in the number and placement of holes and in
manufacturing techniques.
Use the following guidelines to select and use prepunched paper:
• Test paper from several manufacturers before ordering and using large quantities of
pre-punched paper.
• Paper should be punched at the paper manufacturer and not drilled into paper already
packaged in a ream. Drilled paper can cause jams when multiple sheets feed through
the machine.
• Prepunched paper can include more paper dust than standard paper. Your machine
may require more frequent cleaning and feed reliability may not be as good as that of
standard paper.
• Weight guidelines for prepunched paper are the same as for nonpunched paper.
4 2
Paper Handl ing
Print Side
Face down
Face up
Top of Page
Portrait Landscape
Front of tray Left side of tray
Logo enters the Left side of tray
machine first