Sharp MX-M950 Software Manual page 72

Specifying the original scan size (by numerical values)
When scanning a non-standard size original such as a card, follow these steps to specify the original size. The width can
be from 2-1/2" to 17" (64mm to 432mm), and the height can be from 2-1/2" to 11-5/8" (64mm to 297mm).
Select the mode and display the image settings screen.
(1) Touch the tab of the mode that you wish to use.
1
(2) Touch the [Original] key.
The automatically detected original size appears to the right of the [Original] key.
☞
IMAGE SETTINGS
Scan/Original
Scan Size
Auto
2
2-Sided
Booklet
Scan/Original
Auto
Manual
5½x8½
3
5½x8½R 8½x13(216x330)
8½x11
Size Input
Scan/Original
Size Input
4
System Settings (Administrator): Original Size Detector Setting
This is used to set the size entry screen to "inch units" or "mm units".
(page 68)
100% Send Size
Auto
8½x11
Image Orientation
2-Sided
Tablet
8½x11
8½x11R 11x17
8½x13 (216x340) 2
5
Long Size
8½x14
(1), (2)
Cancel
17
X
(2 1/2 17)
inch
Y 11
(2 1/2 11 5/8)
inch
Touch the [Scan Size] key.
OK
Touch the [Size Input] key.
OK
AB
Inch
Enter the scan size (original size).
(3)
(1) Touch the [X] key and enter the X
OK
(horizontal) dimension with the
OK
(2) Touch the [Y] key and enter the Y (vertical)
dimension with the
(3) Touch the [OK] key.
Touch the [OK] key next to the [Cancel] key to complete
the setting and return to the screen of step 3.
72
keys.
keys.