Sharp MX-M950 Software Manual page 140

Press the [START] key (
Scanning begins.
• If you inserted the original pages in the document feeder tray, all pages are scanned.
• If you are scanning the original on the document glass, scan each page one page at a time.
7
When scanning finishes, place the next original and press the [START] key (
and then touch the [Read-End] key.
To cancel scanning...
Press the [STOP] key (
• If other documents have already been stored in the memory box, the document is added to the previously stored
documents.
• The factory default setting for the number of polling times is "Once" (after the document is transmitted to the receiving
machine, it is automatically cleared).
).
) while the original is being scanned.
140
). Repeat until all pages have been scanned