Front Wiper Motor And Link - Subaru FORESTER 2004 Service Manual

Hide thumbs Also See for FORESTER 2004:

Table of Contents

7. Front Wiper Motor and Link

1) Disconnect the ground cable from battery.

2) Remove the cowl panel. <Ref. to EI-32, REMOV-

AL, Cowl Panel.>

3) Disconnect the connector of motor.

4) Loosen the bolts and nuts to remove wiper link.

5) Loosen the bolts and nuts to remove motor.

B: INSTALLATION

1) Install the wiper link to the vehicle, and then con-

nect the motor connector.

2) Connect the battery ground cable to battery.

3) To confirm that the motor is at auto stop position,

connect the harness to motor and turn the wiper

switch ON/OFF once.

4) Disconnect the ground cable from battery.

5) Tighten the nut where rod (A) and link plate (B) is

aligned in a straight line.

Front Wiper Motor and Link

6) Install in the reverse order of removal.

Tightening torque:

C: INSPECTION

1) When the battery is connected to wiper motor

connectors and confirm that motor operates at low

2) When the battery is connected to terminal of

connectors and confirm that motor operates at high

3) Connect the battery to terminals of connector,

and remove the terminal connection with motor ro-

tated at low speed, and stop the wiper motor

through operation.

WIPER AND WASHER SYSTEM

Refer to COMPONENT in General Descrip-

<Ref. to WW-2, FRONT WIPER, COMPO-

NENT, General Description.>

Table of Contents