Front Seat Belt - Subaru FORESTER 2004 Service Manual

SEAT BELT SYSTEM

4. Front Seat Belt

A: REMOVAL
1. FRONT OUTER BELT
1) Fold backrest all the way forward, and then move
front seat all the way forward.
2) Turn the ignition switch to OFF, disconnect the
ground cable from battery, and wait for more than
20 seconds before starting work.
3) Remove the center pillar lower trim. <Ref. to EI-
44, REMOVAL, Lower Inner Trim.>
4) Remove the anchor cover. Loosen the shoulder
anchor bolt, and then detach the shoulder anchor
from center pillar.
5) Turn over the floor mat to remove the bolts.
6) Disconnect the yellow connector of pretensioner
harness, and remove the front outer belt.
7) Remove the center pillar upper trim. <Ref. to EI-
43, REMOVAL, Upper Inner Trim.>
8) Remove the two bolts and adjustable anchor as-
sembly.
Front Seat Belt
CAUTION:
• Do not drop or apply any impact to the pre-
tensioner.
• Pretensioner and bracket should be treated as
an assembly. Do not attempt to disassemble it.
2. FRONT OUTER SEAT BELT WITH LAP
SEAT BELT PRETENSIONER
1) Fold backrest forward, and then move front seat
forward.
2) Turn the ignition switch to OFF, disconnect the
ground cable from battery, and wait for more than
20 seconds before starting work.
3) Remove the center pillar lower trim. <Ref. to EI-
44, REMOVAL, Lower Inner Trim.>
4) Remove the anchor cover. Loosen the shoulder
anchor bolt, and then detach the shoulder anchor
from center pillar.
SB-00003
5) Turn over the floor mat to remove the bolts.
SB-00004
6) Disconnect the yellow connector of pretensioner
harness and orange connector of lap pretensioner
harness, and remove the front outer belt.
7) Remove the center pillar upper trim. <Ref. to EI-
43, REMOVAL, Upper Inner Trim.>
SB-00005
SB-10
SB-00003
SB-00007