Front Seat Belt - Subaru Legacy 2002 Service Manual

Hide thumbs Also See for Legacy 2002:

Table of Contents

Seat Belt System

3. Front Seat Belt

1. OUTER BELT (FRONT)

1) Fold backrest all the way forward, and then

move front seat all the way forward.

2) Turn ignition switch OFF, disconnect ground

cable from battery, and wait for more than 20 sec-

onds before starting work.

3) Remove center pillar lower trim. <Ref. to EI-41,

REMOVAL, Lower Inner Trim.>

4) Remove bracket.

5) Remove webbing guide.

FRONT SEAT BELT

S801303A1801

6) Remove anchor cover. Loosen shoulder anchor

bolt, and then detach shoulder anchor from center

7) Turn over the floor mat to remove bolt.

8) Disconnect yellow connector of pretensioner

harness, and remove outer belt (front).

¼ Do not drop or apply any impact to preten-

¼ Pretensioner and bracket should be treated

as an assembly. Do not attempt to disassemble

2. INNER BELT (FRONT)

1) Disconnect connector.

2) Remove anchor bolt, and then detach inner

S801303A1802

Table of Contents