Web Gui Languages; Save And Apply Changes; Make Your First Call; Figure 9: Ucm6200 Web Gui Language - Grandstream Networks UCM6202 User Manual

Web GUI Languages

Currently the UCM6200 series web GUI supports English, Simplified Chinese, Traditional Chinese,
Spanish, French, Portuguese, Russian, Italian, Polish, German and etc.
Users can select the displayed language in web GUI login page, or at the upper right of the web GUI after
logging in.

Save And Apply Changes

Click on "Save" button after configuring the web GUI options in one page. After saving all the changes,
make sure click on "Apply Changes" button on the upper right of the web page to submit all the changes. If
the change requires reboot to take effect, a prompted message will pop up for you to reboot the device.

Make Your First Call

Power up the UCM6200 and your SIP end point phone. Connect both devices to the network. Then follow
the steps below to make your first call.
1. Log in the UCM6200 web GUI, go to PBX->Basic/Call Routes->Extensions.
2. Click on "Create New SIP Extension" to create a new extension. You will need User ID, Password and
Voicemail Password information to register and use the extension later.
3. Register the extension on your phone with the SIP User ID, SIP server and SIP Password information.
The SIP server address is the UCM6200 IP address.

Figure 9: UCM6200 Web GUI Language

UMC6200 Series User Manual
P a g e | 34