Ricoh B010 Service Manual page 35

[C]
[A]
[B]
22. Raise the upper unit [A] and open the toner hopper cover [B].
23. Remove the sheet [C] covering the developer entrance.
24. Pour 2.4 kg (1.2 kg x 2) of developer [D] into the development unit evenly
across its width, while rotating the knob [E] clockwise as shown.
25. Install the toner cartridge [F]. Refer to the decal attached on the left side of the
machine.
1) Shake the cartridge 5 to 10 times and insert it into the toner hopper.
2) Peel off the green tape [G] from right to left to expose the clear tape and
toner supply holes.
3) Rotate the knob [H] of the cartridge clockwise until it stops.
26. Close the toner hopper cover and upper unit.
SM
COPIER INSTALLATION PROCEDURE
[D]
B010I100.WMF
[E]
[G]
[H]
1-9
[F]
B010I110.WMF
B010