Ricoh B010 Service Manual page 321

SP (SERVICE PROGRAM) MODE TABLES
5
Mode Number/Name
5801 Memory All Clear
5802 Print Free Run
5803 Input Check
5804 Output Check
5811 Machine Serial Number
5812 Service Tel. No. Setting
001 Service Tel. Number
002 SMC Report Transfer Fax
No.
⇒
5900 Function Reset Timer
5907 Plug & Play
5914 Printer Counter Display On/Off
5945 Black and White Reversal
001 Preset Stamp
002 User Stamp
003 Page Numbering
004 Date Stamp
005 Background Numbering
⇒
5957 Continuous Original Feed
5958 15 m Setting
⇒
5959 Design use only
5961 Paper Remaining Display Function Press the Enable or Disable button to enable or disable the
5965 Restart Copy Function
B010
Unnessary Service Programs deleted from this area.
Press Start to initialize the non-volatile RAM.
Before initializing, print out an SMC report (SP5990-2).
Conducts a free run in the previously specified mode.
Press On or Off to switch on or off.
Allows you to test component input (
Allows you to test component output (
The serial number is set with this code before shipping.
Set the telephone number (up to 20 digits).
Adjusts the Function Reset Timer.
Specifies the length of the delay in switching from Copier
function to the Printer/Scanner function when the machine
receives a print/scan job.
[0, 3~30 / 0 / 1 sec step]
When the printer/scanner controller is connected, the timer
should be set to "0" (instant).
Displays the model name (up to 50 bytes). DFU
Press Yes to have the printer controller output displayed on
the screen when the User Tools/Counter key is pressed on
the operation panel.
This SP is effective only after the optional printer controller
is installed.
Press No or Yes to switch off/on the display of the user
stamps in reverse.
Enables or disables the continuous feeding of originals
through the original feeder. When enabled, originals can be
fed one by one during a copy job without having to wait for
each copy to exit.
Enables or disables the optional special order firmware
designed for measuring 15 meter paper lengths.
[0 ~ 1 / 0 / 1 step]
0: Enable
1: Disable
paper remaining display on the operation panel.
If this SP is disabled, it cannot be switched on with the UP
mode settings.
Enables/disables the restart copy function.
[0 ~ 1 / 0 / 1 step]
0: Enable
1: Disable
5-42
Function / [Setting]
5.7)
5.8)
Rev. 02/2003
SM