6.7.5 BY-PASS FEED MECHANISM
Inserting a cut sheet from the by-pass
feed table into the machine switches on
the by-pass feed sensor [A].
The by-pass feed sensor switches on the
drum motor, registration motor [B] and the
registration clutch [C], and the paper starts
to move.
The registration clutch switches off
temporarily so the user can adjust the
position of the paper. This delay time can
be adjusted with SP1911 (By-Pass Feed
Start Timing Adj.).
6.7.6 REGISTRATION
The registration motor [A] and registration
clutch [B] drive the registration roller [C].
When the paper arrives at the registration
roller, the registration clutch switches off
temporarily in order to remove any skew,
and then switches on again to resume
feed.
SM
PAPER FEED AND REGISTRATION
[A]
[C]
[B]
[B]
[A]
6-39
B010D705.WMF
[C]
B010D709.WMF
B010