Juniper NetScreen-5GT Wireless User Manual page 29

a
Port Name
Modem
d
ADSL
a. As labeled on the NetScreen appliance chassis.
b. Only available on the Wireless only device.
c. Only available on the Wireless only device.
d. Only available on the Wireless ADSL Annex A and B devices.
To change the NetScreen device to the Home-Work port mode:
WebUI
Configuration > Port Mode: Select Home-Work from the drop-down list, and
then click Apply.
At the following prompt, click OK:
Operational mode change will erase current configuration and reset the device,
continue?
CLI
exec port-mode home-work
At the following prompt, enter y (for yes):
Change port mode from <trust-untrust> to <home-work> will
erase system configuration and reboot box
Are you sure y/[n]? y
NetScreen-5GT Wireless
b
Dual Untrust Port Mode
Interface Zone
c
serial Null
adsl1 Untrust or
V1-Untrust
wireless1 Wzone1
wireless2 Trust or
V1-Trust
c
Combined Port Mode
Interface Zone
c
serial Null
adsl1 Untrust
wireless1 Wzone1
wireless2 Work
wireless3 Home
Optional Configuration
27