Speed Control - Dodge Viper2017 User Manual

O P E R A T I N G Y O U R V E H I C L E

SPEED CONTROL

When engaged, the Speed Control takes over accelerator operations at speeds greater than
25 mph (40 km/h).
The Speed Control buttons are located on the right side of the steering wheel.
NOTE:
In order to ensure proper operation, the
Speed Control System has been designed to
shut down if multiple speed control buttons
are pushed at the same time. If this occurs,
the Speed Control System can be reacti-
vated by pushing the Speed Control ON/
OFF button and resetting the desired ve-
hicle set speed.
Speed Control can be dangerous where the system cannot maintain a constant speed.
Your vehicle could go too fast for the conditions, and you could lose control and have
an accident. Do not use Speed Control in heavy traffic or on roads that are winding, icy,
snow-covered or slippery.
To Activate
Push the ON/OFF button to activate the Speed Control. The Cruise Indicator Light in the
instrument cluster display will illuminate. To turn the system off, push the ON/OFF button
a second time. The Cruise Indicator Light will turn off. The system should be turned off
when not in use.
Leaving the Speed Control system on when not in use is dangerous. You could
accidentally set the system or cause it to go faster than you want. You could lose control
and have an accident. Always leave the system off when you are not using it.
Speed Control Switches
1 — Push Cancel
2 — Push On/Off
3 — Push Resume/Accel
4 — Push Set/Decel
WARNING!
WARNING!
53