Table of Contents
Advertisement
S P E E D C O N T R O L
Speed Control
When engaged, the Speed Control takes over
accelerator operations at speeds greater than
20 mph (32 km/h).
Speed Control Switches
1 — CANC/Cancel
2 — SET (+)/Accel
3 — RES/Resume
4 — On/Off
5 — SET (-)/Decel
To Activate
Push the on/off button. To turn the system off,
push the on/off button a second time. The system
should be turned off when not in use.
To Set A Desired Speed
Turn the Speed Control on. When the vehicle has
reached the desired speed, push the SET (+) or
SET (-) button and release. Release the accelera-
tor and the vehicle will operate at the selected
speed.
To Deactivate
A soft tap on the brake pedal, pushing the CANC
button, or normal brake pressure while slowing the
vehicle will deactivate Speed Control without eras-
ing the set speed memory. Pushing the on/off
button or turning the ignition switch OFF erases
the set speed in memory.
To Resume Speed
To resume a previously set speed, push the RES
button and release.
To Increase Speed
When the Speed Control is set, you can increase
speed by pushing the SET (+) button.
To Decrease Speed
When the Speed Control is set, you can decrease
speed by pushing the SET (-) button.
To Accelerate For Passing
Press the accelerator as you would normally. When
the pedal is released, the vehicle will return to the
set speed.
For further information, and applicable warnings
and cautions, please refer to the Owner's Manual
at www.mopar.com/en-us/care/owners-manual.html
(U.S. Residents) or www.owners.mopar.ca (Cana-
dian Residents).
Advertisement
Table of Contents
