Dodge Viper2017 User Manual page 49

Manual Seats
Forward And Rearward Adjustment
The adjusting bar is at the front of the seat,
near the floor. Pull the bar upward to move
the seat forward or rearward. Release the
bar once the seat is in the desired position.
Then, using body pressure, move forward
and rearward on the seat to be sure that the
seat adjusters have latched.
Seat Height Adjustment
The seat height adjustment lever is located
on the outboard side of the seat. Pull up-
ward on the lever to raise the seat height or
push downward on the lever to lower the
seat height.
Recliner Adjustment
The recliner lever is located on the outboard
side of the seat. To recline the seat, lean forward slightly, pull the recliner lever upward,
lean backward until the seat is in the desired position, and release the lever. To return the
seat to its full upright position, lean forward, pull the recliner lever upward and hold it until
the seat returns to its full upright position.
• Adjusting a seat while driving may be dangerous. Moving a seat while driving could
result in loss of control which could cause a collision and serious injury or death.
• Seats should be adjusted before fastening the seat belts and while the vehicle is
parked. Serious injury or death could result from a poorly adjusted seat belt.
• Do not ride with the seatback reclined so that the shoulder belt is no longer resting
against your chest. In a collision, you could slide under the seat belt, which could
result in serious injury or death.
G E T T I N G S T A R T E D
1 — Seat Adjustment Bar
2 — Recline Lever
3 — Height Adjustment Lever
WARNING!
Seat Adjustments
47