Adding Fuel - Dodge Viper2017 User Manual

M A I N T A I N I N G Y O U R V E H I C L E

ADDING FUEL

1. Push the fuel filler door release switch (located in the driver's door map pocket).
2. Open the fuel filler door.
3. There is no fuel filler cap. A flapper door
inside the pipe seals the system.
4. Insert the fuel nozzle fully into the filler
pipe – the nozzle opens and holds the
flapper door while refueling.
NOTE:
Only the correct size nozzle opens the
latches allowing the flapper door to open.
5. Fill the vehicle with fuel – when the fuel
nozzle "clicks" or shuts off, the fuel tank
is full.
6. Remove the fuel nozzle and close the
fuel door.
NOTE:
A funnel is provided (located in the trunk in the spare tire area) to open the flapper door
to allow for emergency refueling with a gas can.
• Never have any smoking materials lit in or near the vehicle when the fuel door is open
or the tank is being filled.
• Never add fuel when the engine is running. This is in violation of most state and
federal fire regulations and may cause the "Malfunction Indicator Light" to turn on.
• A fire may result if fuel is pumped into a portable container that is inside of a vehicle.
You could be burned. Always place fuel containers on the ground while filling.
To avoid fuel spillage and overfilling, do not "top off" the fuel tank after filling.
156
WARNING!
CAUTION!
Fuel Filler