Engine Starting/Stopping; Vehicle Security Alarm - Dodge Viper2017 User Manual

G E T T I N G S T A R T E D

ENGINE STARTING/STOPPING

Starting
1. Fully apply the parking brake.
2. Push the clutch pedal to the floor.
3. Place the gear selector in NEUTRAL.
4. Push the red ENGINE START/STOP but-
ton located on the instrument panel.
Release the button when the engine
starts.
NOTE:
The engine will not start unless the clutch
pedal is pushed to the floor.
Stopping
1. Bring the vehicle to a complete stop.
2. Fully apply the parking brake.
3. Push the clutch pedal to the floor.
4. Place the gear selector in 1st Gear.
5. Push the ENGINE START/STOP button once. The ignition switch will return to the
OFF position.

VEHICLE SECURITY ALARM

The vehicle security alarm monitors the vehicle doors for unauthorized entry and the
ignition for unauthorized operation. While the vehicle security alarm is armed, interior
switches for door locks and liftgate are disabled. If something triggers the alarm, the
vehicle security alarm will provide the following audible and visible signals: the horn will
pulse, the park lamps and/or turn signals will flash, and the vehicle security light in the
instrument cluster display will flash.
To Arm:
These steps will arm the vehicle security alarm:
• Push the lock button on the interior power door lock switch with the driver and/or
passenger door open or;
• Push the lock button on the Remote Keyless Entry key fob.
• The vehicle security light in the instrument cluster will flash for 16 seconds. This shows
that the vehicle security alarm is arming. During this period, if a door is opened, the
ignition is cycled to ON/RUN, or the power door locks are unlocked in any manner, the
vehicle security alarm will automatically disarm.
10
Start/Stop Button