Siemens SINUMERIK 840Di Manual page 53

06.03
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
Fig. 2-4 Remove the battery receptacle
10. Remove the cable connection X3 (battery connector) from the module.
11. Remove the used battery and dispose of it acc. to the relevant standards.
12. Install the new battery and plug the battery connector onto the connection
contacts without applying force (X3).
Marking of the
battery connector
Fig. 2-5 Battery connector
2 Hardware Descriptions
2.2 MCI board
2-53