General On The Sinumerik 840Di; Overview Of Sinumerik 840Di; Sinumerik 840Di Manual - Siemens SINUMERIK 840Di Manual

General on the SINUMERIK 840Di

1.1

Overview of SINUMERIK 840Di

Networking
e.g. TCP/IP
I/O devices
Ext.
MCP
progr.
device
Fig. 1-1 SINUMERIK 840Di System Overview
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
With the SINUMERIK 840Di, Siemens can provide a complete PC-integrated
control that controls the drive units and I/Os through the standard field bus
PROFIBUS DP with Motion Control functionality and therefore permits a distrib-
uted design of the overall system.
It therefore constitutes the basis for PC-based automation solutions and is gen-
erally especially designed for applications
S
where decentralized automation solutions are required in the fields of PLC
I/Os and drives
and/or
S
a complete PC-integrated control system is preferred, since this solution
better fits into the intended or existing automation environment.
Industrial PC
(PCU)
MCI board extension
(option)
MCI board
HHU/
HT 6
SIEMENS A&D Operator Panels
OEM Operator Panels
PC monitor and MF2 keyboard
1
1-19