15 SW Installation/Update and Data Backup
15.3 Data backup
15-498
Following menu:
PLEASE SELECT
1
Configure Ghost Parameters
2
Partitions Backup, Mode LOCAL
3
Partitions Restore, Mode LOCAL
4
Delete Image
9
Back to previous Menu
Your Choice [1,2,3,4,9]?
5. Choose the menu item Partitions Backup, Mode LOCAL using key "3".
Following menu:
PLEASE SELECT
1
PCU Basic Software V06.01.04 Win NT 4.0
[05.09.2000;05.30.32pm]
2
Start-up intermediate version 1
[05.10.2000; 04.03.15pm]
9
Back to previous Menu
Your Choice [1,2,9]?
6. The descriptions that have been specified for the individual partition back-
ups are displayed. Choose the partition backup you want to restore.
In the example: "Start-up intermediate version 1" using the key "2".
After confirmation, a warning is displayed:
CAUTION: All data will be overwritten!
If you confirm again, the partitions of the hard disk are restored.
Following menu:
It seems, that Ghost Restore succeeded.
Hit any Key to reboot the System.
When the PCU is booted for the next time under Windows NT, the partitions E:
and F: will be checked by the diagnostic program CHKDISK in succession
whereby the PCU is rebooted automatically.
After completion of the check, the system with the restored backup copy is
active.
Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
06.03
J