6 Turning On and Ramp Up
6.5 Service menu
6.5.1
Install/Update SINUMERIK System
6.5.2
SINUMERIK Tools and Options
Requirements
Operator action
6-194
A detailed description of the software installation/update is to be found in Sec-
tion 15.2, page 15-460.
PLEASE SELECT
1
Install/Update SINUMERIK System
2
SINUMERIK tools and options
3
DOS Shell
4
Start Windows NT (Service Mode)
5
SINUMERIK System Check
7
Backup/Restore
8
Start PC Link
9
Reboot (warm restart)
P
840Di Services
Your Choice [1,2,3,4,5,7,8,9,P] ?
Under menu item: Two SINUMERIK Tools and Options, you can execute the
following actions:
S
Authorizing SIMATIC STEP7.
Authorizing SIMATIC STEP7
The following requirement must be fulfilled:
S
The SIMATIC STEP7 software has already been installed on the PCU.
Select SINUMERIK Tools and Options with key "2".
Following menu:
PLEASE SELECT
1 Activate Step7 for PCU
9 Return to Main Menu
Your Choice [1, 9] ?
To request authorization press key "1".
Actual authorization is performed automatically during ensuring ramp-up of the
PCU under Windows NT.
Note
Authorization can also be performed on the SINUMERIK desktop by starting
the function "STEP7 Authorizing".
Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
06.03