Menu: Settings - Siemens SINUMERIK 840Di Manual

06.03

10.10.2 Menu: Settings

Operating path
Start-up
CHAN1
Channel RESET
Settings
non–volatile user memory
Signal input for shutdown behavior
Diagnostics Settings
Fig. 10-38 Menu: Settings
Modifying data
Group: Settings
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
10.10 NC/PLC diagnosis (840Di SW 2.3 and higher)
The menu for the SINUMERIK 840Di–specific settings is located under the foll-
woing operating path:
S
Operating area switchover > Diagnosis > NC/PLC Diagnosis > Settings
AUTO MPF0
Program aborted
2560 KB RAM / HD non–volatilet
Signal source deactivated
Signal level –
On switchover to the menu, the data displayed are read–only. To modify the
data, first press the soft key: Modify.
The Settings group combines the following functions:
S
Non–volatile user memory
Use the list box to select the size of the non–volatile user memory:
Note
The siye of the SRAM memory area is displayed in the following machine data:
S
MD 18060: INFO_FREE_MEM_DYNAMIC (free static memory).
10 NC Start-Up with HMI Advanced
ROV
Modify
10-399