Top Protective Cover - YASKAWA U1000 iQpump MATRIX Drive User Manual

3.7

Top Protective Cover

Drive models with IP00 specifications become IP20/NEMA 1, UL Type 1 after correctly installing a top protective cover and
bottom conduit bracket. Do not attach the top protective cover when installing the drive in a control panel.
u
Attaching the Top Protective Cover
Insert the small protruding hooks on the sides of the top protective cover into the provided mounting holes on the top of the
drive. Pinch the hooks inward so that the they connect with the mounting holes and fasten the top protective cover back into
place.
Note: Attach a top protective cover and bottom cover from the optional End Cap Kit to an IP00/Open Type enclosure drive to convert the drive
to an IP20/NEMA 1, UL Type 1 enclosure drive.
u
Removing the Top Protective Cover
Insert the tip of a straight-edge screwdriver into the small opening located on the front edge of the top protective cover. Gently
apply pressure as shown in
Note: Removing the top protective cover from an IP20/UL Type 1 enclosure drive voids UL Type 1 protection while retaining IP20 conformity.
YASKAWA TOEPYAIUPW01A YASKAWA AC Drive - U1000 iQpump Matrix Drive User Manual
Figure 3.21 Reattaching the Protective Cover
Figure 3.22 to free the cover from the drive.
Figure 3.22 Removing the Top Protective Cover
3.7 Top Protective Cover
A
3
65