Unlocking The Left Door And Supply Door Via Mechanical Releases - Kodak DryView 8700 User Manual

User Guide

Unlocking the Left Door and Supply Door Via Mechanical Releases

Note
When the left door is unlocked via its mechanical release, the film cartridge stays
open, and the top sheets of film in the cartridge are exposed. To minimize the
number of exposed sheets, darken the room before opening the left door.
Left Door
The imager automatically unlocks the left door if a film jam occurs in the expose or
transport areas. If the imager cannot unlock the door, the local panel displays a
P208 error message. If this occurs, unlock the left door by lifting up the mechanical
release located below the left side of the imager.
Supply Door
The imager automatically unlocks the supply door when the film cartridge is empty or
when Supply is pressed on the local panel. If the imager cannot unlock the door, the
local panel displays a P229 error message. If this occurs,unlock the supply door by
pushing in the mechanical release located inside the left door.
8599110 2001 March Rev. B
4-14