Mouse; Specifications; Removal Procedure; Replacement Procedure - IBM 6150 Hardware Maintenance Manual

Mouse
Specifications
Removal Procedure
The Mouse is a locator device used to control the system. The function
controlled by the Mouse is determined by the program.
The Mouse is a single field-replaceable unit.
See the IBM RT PC Guide to Operations for the cleaning procedure.
Number of buttons
Connector
Power
2
6-Pin keyed
From the system unit
1. Do the "Rear Cover Removal" on page 4-12.
2. Pull the mouse cable connector out from the M connector on the system
unit.
Replacement Procedure
1. Push the mouse cable connector into the M connector on the system
unit.
2. Do the "Rear Cover Replacement" on page 4-13.
User Input Devices 10-143-1