I Terminator Resistor - IBM 6150 Hardware Maintenance Manual

TNL SN20-9843 (03-27-87) to 75X0152 or 75X0166
I Terminator Resistor
Use the diagram below to identify, install, or remove the terminator resistor
on the type E70 drive.
For the IBM 6150, install the terminator resistor if the drive is for fixed-disk
drive position C.
For the IBM 6150, remove the terminator resistor if the drive is for
fixed-disk drive position D or E.
For the IBM 6151, install the terminator resistor.
Set the drive setup switches as shown.
Setup
Switches
Off On
1
X
2
X
3 X
/
4
X
5
X
~
6
X
----
I
D:.~f.t.;
Connector Terminator
Resistor
Connector
Connector
8-130-2 Service Manual