Removal Procedure - IBM 6150 Hardware Maintenance Manual

Removal Procedure
1. Set the power switch on the system unit to Off.
2. Do the "Rear Cover Removal" on page 4-12.
3. Disconnect the cable to the
mM
5085 LPFK Feature from the RT PC
5080 Peripheral Adapter.
4. Remove the clamping device and disconnect the LPFK Feature Cable.
Replacement Procedure
1. Connect the LPFK Feature cable connector to the cable from Peripheral
Cable Kit and install the clamping device.
2. Connect the cable to the adapter.
3. Do the "Rear Cover Replacement" on page 4-13.
4. Set the power switch on the system unit to On.
10-147 -2 Service Manual