Technical Specifications - Hach BioTector B7000 User Manual

Section 3
TYPICAL TECHNICAL DATA
Enclosure:
Dimensions (HxWxD):
Weight:
Power Consumption:
Mains Connection:
Mains Wire Specification:
Signal Wire Specification:
FEATURES IN DETAIL
Display:
Data Storage:
SD/MMC Card:
Operation:
Language Options:
INPUT & OUTPUT SIGNALS
Standard Output:
Digital Output:
Data Transfer Port:

Technical Specifications

Fiberglass Reinforced Polyester
1250mm x 750mm x 320mm
Enclosure height may increase to 1750mm, depending on system optional
features.
90 kg – 120 kg
Enclosure weight may change depending on system optional features.
300 W (VA)
115V AC, 60Hz or 230V AC, 50Hz (10%)
Other power options are available on request.
Number of Cores = 3, Current Rating minimum = 10 Amps, CSA (Cross
Sectional Area minimum) = 1.50mm
Number of Cores = 10 (+2 cores per additional signal), Current Rating
minimum = 1 Amp, CSA (Cross Sectional Area minimum) = 0.22mm
High Contrast 40 Character x 16 Line Backlit LCD with CFL Backlight
Previous 9999 analysis data on screen in the microcontroller memory and
storage of data archive for the lifetime of the analyzer in the SD/MMC card
Previous 99 fault data on screen in the microcontroller memory and storage
of fault data archive for the lifetime of the analyzer in the SD/MMC card
Flash memory card for data transfer and for software & configuration updates
Microcontroller with Membrane Keyboard
English, French, German
Other language options are available on request.
One programmable 4-20mA output signal (typically for TOC)
Maximum impedance: 500 ohms
For systems requiring more than six 4-20mA standard outputs, 4-20mA
Output Multiplex option is implemented to provide 4-20mA data for up to 35
output signals.
Two freely programmable system relays (volt free changeover contact with a
current rating of 1Amp at 30V DC)
One system fault relay (volt free changeover contact with a current rating of
1Amp at 30V DC)
SD/MMC Card and serial RS232 Output for Printer, PC or Data Logger
2
2
.
Page 34