Initializing Photoelectric Sensor - Omron CJ2-CPU Connection Manual

Precautions for Correct Use
In the initialization of Slave Terminal, the backup data for the IO-Link devices that is stored in
IO-Link Master Unit is not cleared. If you need to clear the backup data stored in IO-Link
Master Unit, refer to Clearing Backup Data in 7-4-2 Backing Up Settings of the IO-Link
System User's Manual (Cat. No. W570) to clear the backup data.

8.3. Initializing Photoelectric Sensor

To initialize Photoelectric Sensor, Execute System-Command to "Restore factory settings".
For details, refer to 4. Service data of the Photoelectric Sensor INDEX LIST (Cat. No.
9541795-1).
8．Initialization Method
62