Device Configuration - Omron CJ2-CPU Connection Manual

5.2. Device Configuration

The hardware components to reproduce the connection procedures in this document are as
follows:
Personal computer (CX-One,
Sysmac Studio, and
CX-ConfiguratorFDT
installed,
OS: Windows 7)
USB
cable
Manufacturer
OMRON CJ2 CPU Unit
(Built-in EtherNet/IP port)
OMRON Power Supply Unit
OMRON Switching hub
- Switching hub power supply (24 VDC)
OMRON CX-One
OMRON CX-Programmer
OMRON Network Configurator
- Personal computer (OS: Windows 7)
- USB cable
(for PLC)
(USB 2.0 type B connector)
- LAN cable (STP (shielded,
twisted-pair) cable of Ethernet
category 5 or higher)
OMRON NX-series
EtherNet/IP Coupler Unit
OMRON NX-series
IO-Link Master Unit
- Unit power supply (24 VDC)
- I/O power supply (24 VDC)
OMRON Sysmac Studio
NX-IO Edition
OMRON CX-ConfiguratorFDT
- USB cable
(for Slave Terminal)
(USB 2.0 type B connector)
OMRON IO-Link Photoelectric Sensor
5．Applicable Devices and Device Configuration
CJ2M-CPU32
(Built-in EtherNet/IP port)
LAN
cable
USB cable
Switching hub power supply
Name
NX-EIC202＋
NX-ILM400
W4S1-05C
LAN
cable
Unit power supply
I/O power supply
Model
CJ2M-CPU32
CJ1W-PA202
W4S1-05C
-
CXONE-AL[][]C-V4
/AL[][]D-V4
(Included in CX-One)
(Included in CX-One)
-
-
-
NX-EIC202
NX-ILM400
-
-
SYSMAC-NE001L
(Included in
Sysmac Studio)
-
E3Z-D82-IL3 2M
E3Z-D82-IL3 2M
Version
Ver.2.0
(Ver.2.12)
Ver.1.00
Ver.4.[][]
Ver.9.61
Ver.3.59c
Ver.1.0
Ver.1.0
Ver.1.16
Ver.2.2
Ver.1.00
7