Ers8600B Configuration - Avaya 8600 Technical Configuration Manual

config ip route-policy "default_route" seq
1 action permit
config ip route-policy "default_route" seq
1 match-network "default"
9 RIP Policy Configuration
config ip rip interface
policy "default_route"
config ip rip interface
policy "default_route"
4.6

ERS8600B Configuration:

1 Configuration for Access VLAN 2
config vlan 2 create byport 1
config vlan 2 ports add 1/48
config vlan 2 ip create 10.1.30.2/24
config vlan 2 ip rip enable
config vlan 2 ip rip supply disable
config vlan 2 ip rip listen disable
2 Configuration of Brouter port #1
config ethernet 2/7 ip create 10.1.1.2/30
2090
config ethernet 2/7 ip rip default listen
enable
config ethernet 2/7 ip rip enable
3 Configuration of Brouter port #2
config ethernet 2/1 ip create 10.1.1.13/30
2091
config ethernet 2/1 ip rip default-listen
enable
config ethernet 2/1 ip rip default-supply
November 2010
10.1.1.1 out-
10.1.1.5 out-
ERS 8600 / ERS 8800 RIP Technical Configuration Guide
These two commands add the route policy created in
Step 8 to the two core links to ERS8600B and
ERS8600C from ERS8600A.
This command creates VLAN = 2 using Spanning Tree
Group = 1. If using another STG group, create the new
STG group first, then add port 1/48 to the new STG
group.
This command adds the access port 1/48 to VLAN 2.
This command adds the IP address of 10.1.20.2/24 to
VLAN 2
These commands enable RIP for VLAN 2 and disables
RIP supply and listen.
This command adds the IP address of 10.1.1.2/30 to port
2/7 using brouter VLAN = 2090.
These commands enable RIP and default route listen for
this port.
This command adds the IP address of 10.1.1.13/30 to
port 2/1 using brouter VLAN = 2091.
These commands enable RIP and default route supply
and listen for this interface.
avaya.com
16