Attaching The Side Guide Timing Belt In The Manual Feed Tray Assembly; Removing The Manual Feed Pull-Out Roller - Canon Image Reader-A1 iR5000i Service Manual

9.1.8 Attaching the Side Guide Timing Belt in the Manual Feed Tray
Assembly
1) Butt the rack plate [1] of the manual
feed tray against section A (open state).
2) Move the slide volume in the direction
of B, and attach the timing belt [2] onto
the pulley [3].

9.1.9 Removing the Manual Feed Pull-Out Roller

1) Open the right upper cover. (See p. 5-
49P.)
2) Remove the manual feed pull-out roller
unit. (See p. 5-50P.)
3) Remove the two E-rings [1] (left, right).
4) Remove the stopper [2], two gears [3],
and two bushings [4].
5) Remove the two E-rings [5] and two
bushings [6]; then, detach the manual
feed pull-out roller.
When removing the stopper [2]
and the gear [3], take care not to
lose the three parallel pins [7];
they will slip off.
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
CHAPTER 5 PICK UP/FEEDING SYSTEM
[3]
F05-901-13
[6]
[5]
[1]
[3]
F05-901-14
[2] [1]
B
A
[4]
[7]
[3]
[7]
[2]
[1]
(rear)
[7]
[4]
[5]
[6]
(front)
5-53 P