11Attaching The Side Guide Timing Belt In The Manual Feed Tray Assembly - Canon iR6570 Series Portable Manual

Chapter 2
2.8.9
Adjusting
Position of the Left Deck
Pickup Solenoid (SL7)
iR5570 / iR6570
Before removing the left deck pickup solenoid from
the support plate [1], take note of its position with
reference to the fixing screw [2] of the solenoid. Or,
mark the position for the solenoid by drawing a line on
the support plate with a scriber.
When mounting the solenoid on its own, be sure to
secure it in its original position.
[2]
F-2-71
2.8.10
Adjusting
Position of the Reversing
Flapper Solenoid(SL8)
iR5570 / iR6570
1) Adjust the potion of the so-lenoid so that the drive
lever [1] is pushed fully when the solenoid turns on
(i.e., when the plunger is drawn).
2-44
the
0009-5537
[1]
the
0009-5546
F-2-72
2.8.11 Attaching the Side
Guide Timing Belt in the
Manual Feed
Assembly
iR5570 / iR6570
1) Butt the rack plate [1] of the manual feed tray
against section A (open state).
2) Move the slide volume in the direction of B, and
attach the timing belt [2] onto the pulley [3].
[3]
F-2-73
2.8.12 Adjusting
Position of the Lifter
Motor M20 (M21) of the
Cassette 3 (cassette 4)
iR5570 / iR6570
[1]
[2]
Tray
0009-5540
[2] [1]
B
A
the
0009-5545