Fixing/Delivery Assembly (Face-Down Delivery Assembly) - Canon Image Reader-A1 iR5000i Service Manual

Nip
6) Is the lower roller pressure (nip) as indicated?
NO:
Web
7) Is the web taken up correctly?
NO:
8) Move the plunger of the fixing web solenoid (SL9) by hand. Is the
NO:
Delivery assembly sensor lever
9) Does each sensor lever of the delivery assembly move smoothly?
NO:
Delivery sensor
10) Are the external delivery sensor (PS36) and the fixing assembly out-
NO:
Delivery paper deflecting plate
11) Move the delivery paper deflecting plate with your finger. Dos it re-
NO:
12) Us the paper path of the delivery paper deflecting plate deformed
YES: Replace the delivery paper deflecting plate.
Delivery roller drive assembly
13) Does the delivery roller move smoothly?
NO:
Leading edge margin
14) Is the leading edge margin of print paper 0.3 mm or more and 5.5
NO:

5.1.4 Fixing/Delivery assembly (face-down delivery assembly)

Delivery sensor
1) Is the internal delivery sensor (PS35) normal?
NO:
Reversal sensor
2) Is the reversal sensor 2 (PS38) normal?
NO:
Delivery flapper solenoid (SL5)
3) Does the delivery flapper move correctly?
NO:
COPYRIGHT © 2001 CANON INC.
CHAPTER 4 TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
Adjust it.
Check the fixing cleaning assembly.
web taken up?
Check the fixing web drive assembly.
Adjust it so that it moves smoothly.
let sensor (PS4) normal?
Replace the sensor.
turn to its initial position by the work of the spring?
Correct how the delivery paper deflecting plate is mounted.
or scratched?
Check the delivery roller drive assembly.
mm or less?
Make adjustments in service mode so that the margin is as indi-
cated.
Replace the sensor.
Replace the sensor.
Correct the potion of the delivery flapper solenoid, or replace it.
2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
4-55 T