Canon Image Reader-A1 iR5000i Service Manual page 86

CHAPTER 3 INSTALLATION
Step
5 Holding the two grips (front, rear) on the
side of the pickup assembly, lift the machine
slightly to remove the pad.
6 Turn over the slope plates; then match the
pin holes in the skids with those in the slope
plates, and fit the pins (one each).
Holding the grips (front, rear) found on the
machine, move the machine off the skid by
sliding it on the slope plates.
7 Remove the packaging tape from the body.
8 From the cardboard box that comes with the
machine, take out the parts and auxiliary ma-
terials.
3-6 S
Work
COPYRIGHT © 2001 CANON INC.
Checks/remarks
Check to make sure that none is
missing.
2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001