Delayed Call-Forwarding - Siemens HiPath 4000 Operating Instructions Manual

Step by Step
Call forwarding
Call forwarding
p
Enter the code!
Switching off fixed call forwarding
Press the key. The lamp goes out, call forwarding is
switched off.
Switching fixed call forwarding on again
Press the key. The lamp lights up and call forwarding is
switched on again (the forwarding destination must be
programmed).
Clearing fixed call forwarding
n
Lift the handset.
Enter a code number, say #51, (ask the service person-
nel). You will hear a confirmation tone, call forwarding is
cleared.
t
Replace the handset.

Delayed call-forwarding

Installed for the whole system by the service personnel.
Requirements: Waiting call must be installed
page 44.
If you have activated "call-forwarding on busy / timed" or
"timed call-forwarding" on your telephone
you will automatically obtain a camp-on busy tone if
there is a waiting call and information about the calling
party is shown in the display. This gives you the opp.or-
tunity to take the call before it is forwarded (say you are
waiting for an urgent call).
A calling party hears the ringing tone and is only for-
warded to another telephone when the time that has
been set elapses.
Making Calls – Convenience Functions
page 22,
67