Call Forwarding Via Code Numbers - Siemens HiPath 4000 Operating Instructions Manual

Step by Step
If you have set up station fixed or station variable call
forwarding, and if the manually programmed forwarding
destinations are not obtainable (for example, because
they are busy), then calls are automatically forwarded to
the system forwarding destinations.

Call forwarding via code numbers

The following call-forwarding modes can be set up via
codes:
Call-forwarding mode
Programming and activating fixed call-for-
warding
Activating fixed call-forwarding
Clearing (and de-activating) fixed call-for-
warding
De-activating fixed call-forwarding
Programming and activating unconditional,
variable call-forwarding
Programming and activating variable call-for-
warding for internal calls
Programming and activating variable call-for-
warding for external calls
Programming and activating variable call-for-
warding on busy
Programming and activating timed, variable
call-forwarding
Programming and activating variable call-for-
warding (on busy/timed)
De-activating variable and fixed call-forward-
ing
De-activating variable call-forwarding for in-
ternal calls
De-activating variable call-forwarding for ex-
ternal calls
Activating system call-forwarding
De-activating system call-forwarding
See page 19 for the display messages that occur
when call-forwarding is activated/de-activated.
Making Calls – Convenience Functions
Code
(example)
*51
*41
#51
#41
*42
*44
*43
*45
*46
*47
#41
#44
#43
*90
#90
65