Selecting The Language For User Prompts (Displays) - Siemens HiPath 4000 Operating Instructions Manual

Making Calls – Basic Functions
Step by Step
Language
34
Selecting the language for user prompts
(displays)
Your HiPath 4000 system can be configured for up to
five different languages. The first language pro-
grammed is the default. If your telephone has a lan-
guage key, you can program a different language.
The period of time for which the other language re-
mains active depends on the language option that has
been configured. There are two possibilities:
• Static language option
The language remains programmed until you
select a different language.
Temporary language option
•
The language remains programmed until the end of
the next call, after which the system reverts to the
default language.
Selecting a language:
Press the key. The language selected appears on the
display for five seconds and is then set. Keep pressing
the key if you wish to select a different language.
This user guide can be ordered in other languag-
es (not used in US) page 117.