Table of Contents
Advertisement
Fig. 7.
Front seat (2-door)
1.
Adjustment of seat inclination
2.
Adjustment of seat height
Adjustment of lumbar support
3.
4.
Longitudinal adjustment of seat
Adjustment of backrest inclination
5.
The scuttle section is similar to that on the 2- and
4-door models.
The side section (Fig. 9) consists of the front pillar
(10), intermediate pillar (7), rear section, interme-
diate (9) and outer (8) cantrails, inner and outer
Fig. 8.
Floor section,
Station Wagon
1.
I nner cantrail
2.
Rear seat support
3.
I ntermediate floor plate
4.
Rear floor plate
5.
Cross-member
6.
Side member
7.
Spare wheel well
8.
Cross-member
Attachment for rear axle
9.
support arms
10.
Cross-member
11.
Front floor plate
Fig. 9.
Side section, Station Wagon
1.
Roof former
2.
I nner frame for side
window
3.
Upper rear pillar
4.
Rear mudguard
5.
Rear intermediate
pillar
roof formers (1) and windscreen pillar. The rear
section is composed of the rear wheel arch (6), rear
mudguard (4), inner frame (2) for rear side window
and upper (3) and lower rear pillar. The upper part
of the rear mudguard is extended upwards and
forms the outer frame for the rear side window.
P 120
6.
Rear wheel arch
7.
Front intermediate
pillar
8.
Outer cantrail
9.
I ntermediate cantrail
10.
Front pillar
8-S
Advertisement
Table of Contents
