Volvo P 120 Service Manual page 10

3. Remove the screws in the hinges and lift off
the door.
The holes in the centre pillar are larger than
the diameter of the bolts. When running nuts
are used, this enables the door to be adjusted
both vertically and laterally.
Removing door handle and upholstery
1. Remove the armrest, which is attached with two
screws accessible from underneath the armrest,
see Fig. 16.
2. Remove the door handle and window winding
handle. These are removed by prising out the
l ocking washer which holds them with tool
see Fig.
SVO 2297,
l ocking washer and circlip are illustrated in
Fig. 18.
3. Remove the upper trim moulding. This is
attached to the door edges by four screws,
see Fig. 19.
1 7. The window winder,
Removing and fitting the window winder
Fig. 17.
Fig. 18. Window winder with circlip
Fig. 19.
Removing the upper trim moulding
P 120