About Led - Panasonic KV-Sl3066 Operating Manual

5.1 About LED

5.1 About LED
The status of the scanner is displayed by the LED (Red) ( ) and the LED (Green) ( ), as shown in the
table below:
LED (Red)
OFF
OFF
OFF
OFF
OFF
OFF
Blinking (Slow)
Blinking (Slow)
ON
If the power off feature in sleep mode is enabled, and if no operation is performed for a certain period of time, the scanner will be
*1
turned off automatically. Press the power button ( ) of the scanner to turn it on. You can enable/disable the power off feature, and
change the time until the scanner turns off in User Utility.
If no operation is performed for 15 minutes or longer, the scanner will enter sleep mode automatically to conserve energy. Press
*2
any button (except the power button) on the scanner's operation panel to return to ready mode. The time until the scanner enters
sleep mode can be changed in User Utility.
For details about the error, check in User Utility.
*3
18
LED (Green)
OFF
ON
Blinking (Fast)
Blinking (Fast, 2 times consecutively)
Blinking (Fast, 3 times consecutively)
Blinking (Slow)
Blinking (Slow)
ON
OFF
Status
Power OFF
*1
Ready mode or Scanning
Warming up
Double Feed Skip mode
Dog-ear detection skip mode
Sleep mode or Cleaning mode
*2
Sleep mode and Notification mode
*2
Notification mode
Error
*3