About Led - Panasonic KV-S1037 Operating Manual

5.1 About LED

The status of the scanner is displayed by the LED
the table below:
LED (Red)
OFF
OFF
OFF
OFF
OFF
OFF
Blinking (Slow)
ON
If the power off feature in sleep mode is enabled, and if no operation is performed for a certain period of time, the scanner will be
*1
turn off automatically. Press the power button ( ) of the scanner to turn it on. You can enable/disable the power off feature, and
change the time until the scanner turns off in User Utility.
If no operation is performed for 15 minutes or longer, the scanner will enter sleep mode automatically to conserve energy. Press
*2
the Start/Stop button (
mode can be changed in User Utility.
For details about the error, check in User Utility.
*3
LED (Green)
OFF
ON
Blinking (Fast)
Blinking (Fast, 2 times consecutively)
Blinking (Fast, 3 times consecutively)
Blinking (Slow)
ON
OFF
) on the scanner's operation panel to return to ready mode. The time until the scanner enters sleep
(Red) ( ) and the LED
Power OFF
Ready mode or Scanning
Warming up
Double Feed Skip mode
Dog-ear detection skip mode
Sleep mode
Notification mode
Error
*3
5.1 About LED
(Green) ( ), as shown in
Status
*1
or Cleaning mode
*2
17