Filter; Setting Bridge Filter - Zte ZXV10 H11X User Manual

ZXV10 H11X (V1.0)Home Gateway User's Manual
If you have set the IP address of a certain network
segment of the LAN to the DMZ zone, you must set the
corresponding subnet mask here.
For example, you can set host 192.168.1.5 as a host of the DMZ
zone.

Filter

Setting Bridge Filter

Click the Bridge Filter link on the left part of the WEB page to enter
the Bridge Filter page, where you can configure an access filter
rule based on the source MAC address and the destination MAC
address. You can set up to 12 bridge filter entries.
Enable Bridge Filter
Enabling the bridge filter function
Name
Name of the bridge filter
Protocol
84 Confidential and Proprietary Information of ZTE CORPORATION